RCB- 80 Ultra Low Temperature Bath
Precision fluidised Sand Baths
Tecal Series of Dri-Block® Calibrators
Portable Dri-Block® Calibrator model
CE-350
NEW Tecal 1200S High Temperature Portable
Calibration Furnace
NEW Tecal “Field” Range of Dri-Block
Calibrators
|
Thermometers & Probes The Tecal Accu-Temp
RTD thermometer is an excellent choice for use as a
laboratory grade reference thermometer. It offers the flexibility of two RTD input channels, along with direct
temperature readout in degrees °F, °C and ohms. Combine the Tecal Accu-Temp with one of our PRT's above for a high
accuracy temperature measurement system. The Techne hand-held
Model 4400 Series Ultra-High Accuracy Thermometer takes
metrology-level temperature measurement to the laboratory, the production
floor, and the field.The 4400 series thermometers are configured and hardwired
to the probe and calibrated as a system for high accuracy. When one type of probe will do the job a hardwired system offers excellent repeatability
with ultra high accuracy. The Techne Model
WSP350 and WSP660 PRT's are an excellent choice for use as a
reference sensor in all types of systems including dry block
calibrators, liquid calibration baths, ovens, reactors and other
applications where temperature needs to be accurately measured. |
|
Techne
invented the “Clip On” thermoregulator in 1948, and now offer four “Clip On” units. Unheated baths Designed to be used with a clip-on Tempette or Tempunit® thermoregulator, these baths incorporate attractive carrying handles for
added safety. Temperature controlled baths A
comprehensive range of temperature controlled baths are on
offer simply by selecting one of Techne’s stainless
steel baths followed by one of the thermoregulators available. Software TU-20D/HT Thermsoft
has been designed for use with Tempunit®
model TU-20D and TU-20HT control unit and thermostatic baths. Thermsoft is a windows based
program that connects via an RS232 connection to your computer. |
|
The FB-08 is anattractively
finished rectangular bench standing unit. The controls
for temperature and fluidising air flow are mounted
on a recessed panel on the front of the unit, together
with on-off switches for the power supply and the dust extractor and indicators for various
functions. FB-08LT Fluidised bath is a
rectangular bench standing unit. It incorporates a cylindrical fluidised
bath, three
term digital set point controller, digital temperature
indicator and two flowmeters for regulating
fluidised air and liquid nitrogen (LN2) supply respectively. The FB-08C Fluidised bath has
been designed to allow for calibration of
thermal sensors over the temperature range 50°C to 700°C
with minimum supervision and works in conjunction
with a supervisory computer via an RS232 (or optional IEEE488) interface. Basic control programmes
are set by the operator allowing for the control
of set temperature, incremental temperature steps, dwell times and control of dead bed state. |
|
Designed
for external circulation to maintain temperature of instruments
such as viscometers, photometers, refractometers, fermenters and other reaction vessels. This
compact range of bath circulators are available with 5, 7 and 12 litre
capacity. Models offer high pump performance and temperatures
of up to 250°C and, with the addition of a flow cooler, a minimum temperature of -35°C. All complete with a cover, carry handles and a drain tap (see
page .. for full
thermoregulator specification – TE-10A, TE-10D, TU-20D and TU-20HT). |
|
RCB- 80 Ultra Low Temperature The RCB-80 is a mechanically-refrigerated bench top
circulating bath that provides precise temperature control for a
wide variety of applications and eliminates the cost and potential hazards
associated with using dry ice
or liquid nitrogen. It offers a 4 liter bath capacity with an ultimate low temperature of -80°C. A built in magnetic stirrer, with
variable speed control, provides excellent temperature uniformity and stability. A
custom-fitted phenolic cover is standard with every unit when a probe
holder is not ordered. |
|
·
Four models ·
Compact refrigeration units for operation down to
-35°C ·
Cooling head fits neatly into the corner of a
Techne liquid bath (RU Series Dip Coolers) ·
Conserves water ·
Designed for use with Techne liquid baths Refrigerated baths ·
Twelve models ·
Circulating bath with built in refrigeration ·
Temperature range -35°C to 100°C ·
Three different capacities of refrigerated bath
7, 12 or 22 litre |
|
Precision
fluidised Sand Baths |
|
Tecal Series of Dri-Block®
Calibrators Tecal
140S/H This temperature calibrator is ideal for calibrating temperature sensors used in the food and pharmaceutical industries as well as calibrating any sensors used in the temperature range outlined in
the specification below. Tecal
425S/H These calibrators use large aluminium blocks surrounded by band heaters to give fast
heating times and provide high accuracy, uniformity and
stability up to 425°C. Tecal
650S/H This temperature calibrator is ideal for calibrating temperature sensors used in the food and pharmaceutical industries as well as calibrating any sensors used in the temperature range outlined in
the specification below. |
|
Portable
Dri-Block® Calibrator model CE-350 The CE-350 is a low-cost alternative to
the Tecal 425S where
routine checking of RTD and thermocouples is all that is required. |
|
NEW
Tecal 1200S High Temperature Portable Calibration
Furnace |
|
NEW
Tecal
“Field” Range of Dri-Block Calibrators Following on from many years of experience with the high quality Tecal S and H
models the new F models have been introduced to
offer a compact and light weight, high performance range of
Dri-Block temperature Tecal 140F Low temperature
Portable Field Temperature Calibrator Tecal 425F Medium temperature
Portable Field Temperature Calibrator Tecal 650F High temperature
Portable Field Temperature Calibrator |